SE-R/G20/NX Turbo Kits


AEM Water Injection Kit is used to reduce air inlet temperatures and exhaust gas temperatures. Water is injected into the intake by a 150psi pump with jet spray nozzle. This allows the increase in boost pressure without having to run higher-octane fuel. Set the activation boost and your max boost settings. The system will progressively increase the injection percentage until the max boost has been reached. - $392.00



JGY-GT28RS turbo kit - $3,200
includes: (all pieces new)

- GT28RS Turbo
- JGY Manifold
- 4 50lb Injectors
- JGY Fuel Rail
- Injectors Connectors
- 2.5 inch Downpipe
- JGY Intercooler Kit
- 300Z MAF
- J pipe
- lines/fittings/actuator bracket/actuator

This is a complete bolt on turbo kit. The ONLY thing else needed is a tuned ECU for the kit to be ready for your Nissan FWD SR car providing you with up to 340HP.
We also can custom make this kit to work with the JGYBB37R or JGYBB37 and other injectors. Please inquire.

Precision 39mm wastegate kit. Comes with all flanges and an assortment of springs for varying PSI. - $220.00


HKS actuator upgrade for t25 bluebird and avenier. This actuator is set to around 12-14 psi and is adjustable for a little more. - $106.21


JGY Manifold - Puts turbo in stock location for GTI-R's, larger flow for better top end performance when compared to the stock GTI-R - $259


Polished heat shield for JGY Manifold - $29


GTI-r Manifold - $306
J Pipe for GTI-R's - $100


5 Bolt T2 outlet flange for custom J-pipe - $50 T2 5 bolt outlet flange - $17 T2 discharge flange - $29.99 T3 5 bolt discharge flange - $33.49

T25 Turbo Kit - Includes T25 Turbo, Manifold, Downpipe, 370cc injectors, intake pipe, complete intercooler kit with intercooler, downpipe, all hoses, fittings, and couplers for oil and water lines, should make about 205HP - $1530, ****yes, update, price drop to $1530****
Timeslip - This was performed with this turbo kit and drag slicks
Dyno Chart - Same turbo setup on a '93 SE-R


NEW & in stock JGY turbo heat shield, great for FWD Nissans, like Sentra's, G20, any SR powered car with a GT style turbo, reflects heat from turbo away from fans and radiator - $35


NEW & in stock JGY Steel Braided Turbo Oil line kit, totally does away with the factory SR metal line & banjo bolt fittings. This kit will work with bottom & top mount turbo applications -$69


Precision 46mm wastegate kit. Everything that you will need to do the job. Includes flanges and different springs so that you can change PSI. Only $318.00


Tial 38mm wastegate .6bar spring - $249


JGY Turbo Bracket for use with internal gated turbos, such as JGYBB37R's HKS2538's and Garrett GT28's - $60

JGY Turbo Oil Restrictor, .063 for non ball bearing, .041 for ball bearing, this is for Garrett center sections traditionally, if you have a T3/T4 style, then it is different, also the restrictor is made to work with hose connections for the oil in -$21

Turbo line kits - for installing T25's and T28's on non-turbo motors, includes oil in, oil out, water in, water out, all fittings hoses clamps needed - $65


Steel Braided oil feed line for t25, and gt garrett turbos on to sr20de motors with inline restrictor - $79


JGY oil line for turbo'd SR's that want an upgrade and the look. This uses -AN swivel fittings, takes the oil from the factory location on the block and goes to the turbo. An in-line restrictor IS included in the kit. This is an awesome buy at $69